SuperServer 1026TT-IBQF
Overview

Designed for optimal performance, the dual-processor SuperServer 1026TT-IBQF support the QPI format quad-core/dual-core Xeon® 5500 Series processors in a high-density 1U form-factor. The SuperServer 1026TT-IBQF is ideal for network infrastructure, front-end enterprise, and minimal-downtime cluster server systems.

Specifications

Product SKU

SuperServer 1026TT-IBQF (Black)

Motherboard

Super X8DTT-IBQF + Super X8DTT-IBQF

CPU

  • Dual 1366-pin LGA Sockets
  • Quad-Core Intel® Xeon®Processor 5500 sequence (Nehalem-EP processor)

System Memory

Memory Capacity

  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory Mirroring supported

Memory Type

  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

1GB, 2GB, 4GB , 8GB** , 16GB**

Memory Voltage

1.5 V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices (per Node)

Infiniband

Mellanox ConnectX QDR Infiniband 40Gbps Controller

Chipset

  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D

SATA

  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC

Network Controllers

  • Intel® 82576 Dual-Port Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

  • Matrox G200eW 16 MB DDR2

Super I/O

  • Winbond W83527HG chip

Clock Generator

  • 932S421 chip

Input/Output (per Node)

Serial ATA

  • Six Serial ATA ports
  • Six SATA hard drives supported

LAN

  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

  • 1x VGA Port

Serial Port

  • 1 Fast UART 16550 serial port

Infiniband

  • 1 External QSFP Infiniband Connector

System BIOS (per Node)

BIOS Type

  • 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support

Chassis

Form Factor

  • 1U Rackmount

Model

  • CSE-809TQ-1200B

Dimensions

Height

  • 1.7" (43mm)

Width

  • 17.2" (437mm)

Depth

  • 27.75" (705mm)

Gross Weight

  • 40 lbs (18.1kg)

Available Colors

  • Black

Front Panel (per Node)

Buttons

  • Power On/Off button
  • System Reset button

LEDs

  • Power LED
  • Hard drive activity LED
  • 2x Network activity LEDs
  • System Overheat LED

Expansion Slots (per Node)

PCI-Express

  • 1 (x16) PCI-E ( Low Profile)

Drive Bays (per Node)

Hot-swap

  • 4x 2.5" SATA Hot-swap drive bays

SATA Backplane

SATA Backplane

  • 1U SATA Backplane

System Cooling

Fans

  • 6x Cooling Fans

Power Supply

AC Input

  • 100 - 140V, 50 - 60Hz, 7.5 - 11Amp
  • 180 - 240V, 50 - 60Hz, 5 - 8Amp

DC Output +5V standby

  • 4 Amp

DC Output +12V

  • 74 Amp @ 100-140V
  • 100 Amp @ 180-240V

Certification

80 PLUS Gold
  80 PLUS Gold Certified
 

Management

Software

  • IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support
  • Superhttp://www.supermicro.com/a_images/bullets/SuperO.gif Doctor III
  • Watch Dog
  • NMI

Power Configurations

  • ACPI Power Management
  • Main Switch Override Mechansim
  • Power-on mode for AC power recovery

PC Health Monitoring

CPU

  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator

FAN

  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control

Temperature

  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI

LED

  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED

Other Features

SDDC Support

Operating Environment / Compliance

RoHS

RoHS Compliant

Environmental Spec.

  • Operating Temperature: 10° to 35° C (50° to 95°F)
  • Non-operating Temperature: -40° to 70° C (-40° to 158° F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)