SuperServer 6026TT-HIBQRF
Overview

Four hot-pluggable systems (nodes) in a 2U form factor. Each node supports the following:

  • Intel® Xeon® processor 5600/5500 series, with QPI up to 6.4 GT/s
  • Up to 192GB** DDR3 1333/ 1066/ 800MHz ECC Registered DIMM / 48GB Unbuffered DIMM
  • 1 (x16) PCI-E ( Low Profile)
  • Integrated IPMI 2.0 with KVM and Dedicated LAN
  • Dual Intel® 82574L Gigabit Ethernet Controller
  • 3x Hot-swap SATA Drive Bays
  • 1400W Gold-level High-efficiency Redundant Power Supply
  • Mellanox ConnectX QDR Infiniband 40Gbps Controller w/ QSFP connector
Specifications

Product SKU

SuperServer 6026TT-HIBQRF (Black)

Motherboard

4x Super X8DTT-HIBQF

CPU

  • Dual 1366-pin LGA Sockets
  • Supports up to two Intel® 64-bit Xeon® processor(s) of the same type below:
    • Intel®
      Xeon® Processor 5600 Series (Westmere)
    • Intel®
      Xeon® Processor 5500 Series (Nehalem-EP)
  • NOTE: 5500 Series processors with Max TDP < 100W

System Memory

Memory Capacity

  • 12x 240-pin DIMM sockets
  • Supports up to 192 GB** 1333 / 1066 / 800MHz DDR3 ECC Registered memory
  • Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
  • Memory Mirroring supported

Memory Type

  • 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs

DIMM Sizes

  • 1GB, 2GB, 4GB , 8GB** , 16GB**

Memory Voltage

  • 1.5 V

Error Detection

  • Corrects single-bit errors
  • Detects double-bit errors (using ECC memory)
  • Supports Intel® x4 and x8 Single Device Data Correction (SDDC)

On-Board Devices (per Node)

Infiniband

  • Mellanox ConnectX QDR Infiniband 40Gbps Controller

Chipset

  • Intel® 5520 (Tylersburg) chipset
  • ICH10R + IOH-36D

SATA

  • Intel ICH10R SATA 3.0Gbps Controller
  • RAID 0, 1, 5, 10 support

IPMI

  • Support for Intelligent Platform Management Interface v.2.0
  • IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
  • Winbond® WPCM450 BMC

Network Controllers

  • Dual Intel® 82574L Gigabit Ethernet Controller
  • Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
  • Intel® I/OAT 3 support for fast, scaleable, and reliable networking
  • VMDq support for better performance of virtualization
  • 1x Realtek RTL8201N PHY (dedicated IPMI)

Graphics

  • Matrox G200eW

Super I/O

  • Winbond W83527HG chip

Clock Generator

  • 932S421 chip

Input/Output (per Node)

Serial ATA

  • Six Serial ATA ports
  • 3 SATA hard drives supported

LAN

  • 2x RJ45 LAN ports
  • 1x RJ45 Dedicated IPMI LAN port

USB

  • 2 rear + 1 header (2 Ports)
  • 4 total USB ports, 2.0 Compliant / 1.1 Compliant

VGA

  • 1x VGA Port

Serial Port

  • 1 Fast UART 16550 serial port

Infiniband

  • 1 External QSFP Infiniband Connector

System BIOS (per Node)

BIOS Type

  • 32Mb SPI Flash EEPROM with AMI® BIOS

BIOS Features

  • Plug and Play (PnP)
  • PCI 2.2
  • ACPI up to 3.0
  • USB Keyboard support

Chassis

Form Factor

  • 2U Rackmount

Model

  • CSE-827H-R1400B

Dimensions

Height

  • 3.5" (89mm)

Width

  • 17.2" (437mm)

Depth

  • 28.5" (724mm)

Gross Weight

  • 85 lbs (38.6kg)

Available Colors

  • Black

Front Panel (per Node)

Buttons

  • Power On/Off button
  • UID button

LEDs

  • Power LED (on power button)
  • Network activity LED
  • System Overheat/fan fail/power fail/ LED
  • UID LED (on UID button)

Expansion Slots (per Node)

PCI-Express

  • 1 (x16) PCI-E ( Low Profile)

Drive Bays (per Node)

Hot-swap

  • 3x 3.5" SATA Hot-swap drive bays

SATA Backplane

SATA Backplane

  • 2U Hard drive Backplane

System Cooling

Fans

  • 4x Cooling Fans

Power Supply

Redundant 1400W high-efficiency power supply with PMBus

AC Input

  • 1200W: 100 - 140V, 50 - 60Hz, 10.5 - 14.7 Amp
  • 1400W: 180 - 240V, 50 - 60Hz, 7.2 - 9.5 Amp

DC Output +5V standby

  • 6 Amp

DC Output +12V

  • 100 Amp @ 100-140V
  • 116 Amp @ 180-240V

Certification

80 PLUS Gold
  80 PLUS Gold Certified
 

PC Health Monitoring

CPU

  • Monitors for CPU Cores,+1.5V, +3.3V, +5V, +12V, +5 Stdby, +3.3 Stdby, VBAT, Memory Voltages.
  • CPU Core 6-Phase-switching voltage regulator

FAN

  • Total of four 4-pin PWM fans
  • 4x fans with tachometer monitoring
  • Status monitor for speed control
  • Status monitor for on/off control
  • Low noise fan speed control

Temperature

  • Monitoring for CPU and chassis environment
  • CPU thermal trip support
  • Thermal Control for 4x Fan Connectors
  • PSU I2C temperature sensing logic
  • Thermal Monitor 2 (TM2) support
  • PECI

LED

  • Power Fail / Overheat LED
  • Suspend-state Indicator LED
  • UID LED

Other Features

  • SDDC Support

Operating Environment / Compliance

RoHS

  • RoHS Compliant

Environmental Spec.

  • Operating Temperature: 10°to 35°C (50°to 95°F)
  • Non-operating Temperature: -40°to 70°C (-40°to 158°F)
  • Operating Relative Humidity: 8% to 90% (non-condensing)
  • Non-operating Relative Humidity: 5 to 95% (non-condensing)